Hi all
Having a bit of trouble finding some info on this....
Got an 06 FSE450, bout 3000km s on it and still going strong. On my third fork rebuild now and have decided to upgrade the spring rate from the stock .45 to a .48 (put on a couple of kilos since 2006).
Im 186cm (6 ft 1 inch) and 89 kgs (196 lbs), medium level rider and ride variable terrain (from sand - tight,single trail - open firebreaks - hill climbs).
I've got bar risers and lowered footpegs on the bike, and was wondering if anyone had any tips on getting the 45mm Marzochhi Shiver USD's performing - i find them too soft, and twitchy on small obstacles.
Thanks in advance
Having a bit of trouble finding some info on this....
Got an 06 FSE450, bout 3000km s on it and still going strong. On my third fork rebuild now and have decided to upgrade the spring rate from the stock .45 to a .48 (put on a couple of kilos since 2006).
Im 186cm (6 ft 1 inch) and 89 kgs (196 lbs), medium level rider and ride variable terrain (from sand - tight,single trail - open firebreaks - hill climbs).
I've got bar risers and lowered footpegs on the bike, and was wondering if anyone had any tips on getting the 45mm Marzochhi Shiver USD's performing - i find them too soft, and twitchy on small obstacles.
Thanks in advance