E Edm11 New member Jul 25, 2014 #1 The blue backlight is on but no data & bike runs fine. All connectors seem connected, but just a blue screen with no readouts. Anyone had this happen ? Thanks in advance
The blue backlight is on but no data & bike runs fine. All connectors seem connected, but just a blue screen with no readouts. Anyone had this happen ? Thanks in advance
W wa_ndro New member Jul 25, 2014 #2 is that the ACEWELL unit? havent had this happen but Greenland MX sell replacements cheap if its part number : BFS450634005
is that the ACEWELL unit? havent had this happen but Greenland MX sell replacements cheap if its part number : BFS450634005
E Edm11 New member Jul 25, 2014 #3 I just had the right radiator replaced. I think it may be a loose connector. Is the pictured connector supposed to be connected ? It's on right side behind shroud by fan. I can't find the mate
I just had the right radiator replaced. I think it may be a loose connector. Is the pictured connector supposed to be connected ? It's on right side behind shroud by fan. I can't find the mate
E Edm11 New member Jul 25, 2014 #4 wa_ndro said: is that the ACEWELL unit? havent had this happen but Greenland MX sell replacements cheap if its part number : BFS450634005 Click to expand... Thanks! I may look in to that if it's not just a loose connector
wa_ndro said: is that the ACEWELL unit? havent had this happen but Greenland MX sell replacements cheap if its part number : BFS450634005 Click to expand... Thanks! I may look in to that if it's not just a loose connector
E Edm11 New member Jul 25, 2014 #5 Just spoke w/ dealer & they said that plug is supposed to be exposed. Must be another plug dis-connected
Just spoke w/ dealer & they said that plug is supposed to be exposed. Must be another plug dis-connected
F fastisbetter Member Oct 5, 2014 #6 I had an issue with mine where the wire casings had cracked at the head unit causing the wires to touch. solved with some shrink tubing
I had an issue with mine where the wire casings had cracked at the head unit causing the wires to touch. solved with some shrink tubing
E Edm11 New member Oct 6, 2014 #7 Thx, mine was rookie mistake of bad battery. Replaced battery all all was well again !