Could anyone upload the instructions for me? I want to get the new 2015 300 running right before we ride it. I'm done with the stock needle and have a JD kit just sitting here off my 2010 300. My understanding is the needles are the same for all the keihin kits. I have the n1eg needle on the 2ND clip, 168 main, and 38 pilot and I don't like it at all. Flat on the low and flat on the top. Seems rich on top and lean on bottom. I emailed jd a few days ago and still haven't got the instructions. Thank you.
2011 to 2014 jd jetting instructions
- Thread starter BryanMcc
- Start date
hamilton
Gold Level Site Supporter
Can't upload the sheet
Here's the important info for a 38mm carb.
Starting point for 0-3000ft 40 pilot red needle #4 180 main
Rich to lean #4 blue, #3 blue, #4 red #2 blue #3 red #2 red
3000-6000ft red#4 175 main
5000-8000ft red#3 170 main
above 8000ft red#2 165 main
cold temps below 45f at sea level blue #4
Here's the important info for a 38mm carb.
Starting point for 0-3000ft 40 pilot red needle #4 180 main
Rich to lean #4 blue, #3 blue, #4 red #2 blue #3 red #2 red
3000-6000ft red#4 175 main
5000-8000ft red#3 170 main
above 8000ft red#2 165 main
cold temps below 45f at sea level blue #4
