2018 GasGas EC300

[Aborn299]

-Excellent condition. Original Owner. A-Vet Enduro owned
-Race Tech serviced and sprung suspension for 190-200lb rider. Stock valving. No need to tweak it.
-KYB suspension similar to that used on Yamahas. Best handling enduro bike I've ever ridden.
-Hard Enduro Carapaks skidplate/pipe guard. Made in Poland
-Renthal 49T rear sprocket
-Renthal Reed/Windahm Twinwall bars with G2 Ergonomics handguards
-Boyesen Flexgrip on clutch side
-G2 Ergonomics Throttle tube with interchangeable cams and teflon lining
-Midwest Mountain Engineering clutch lever
-Faast Company Footpegs with anti vibration nylon insert
-Keihin carb comes stock. Jetted perfectly. Extra jets and needles included
-Tubliss Gen 2 setup front and rear. Never failed me. Pirelli Scorpion MX Extra X rear tire with one ride on it. Scorpion XC Mid Hard front (Pirellis superior version of M59).
-Bulletproof Designs Radiator guards
-Radiators professionally TIG welded on all seams and lateral reinforcement bars added.
-Aftermarket rear brake pedal tip with spring loaded folding feature.
-Nissin Brakes. Uses Honda pads. Easy to find.
-FMF silencer with Spark Arrestor. Stock silencer included.
-Enduro Plate license plate holder
-Lithium battery
-Hardwired with A'Me Heated grips harness. Features 3 heat settings. Grips included.
-Xtrig Shock Preload Adjuster
-CT STREET TITLE AVAILABLE
-Many stock parts included.
-66 Hours
-973 miles
-Selling due to broken femur while mountain biking.

MSRP on a 2020 is $10,499

Buy mine all setup for $5,500 obo

Located in Manchester, CT
Local Pickup only

 

[GasGas]

-Excellent condition. Original Owner. A-Vet Enduro owned
-Race Tech serviced and sprung suspension for 190-200lb rider. Stock valving. No need to tweak it.
-KYB suspension similar to that used on Yamahas. Best handling enduro bike I've ever ridden.
-Hard Enduro Carapaks skidplate/pipe guard. Made in Poland
-Renthal 49T rear sprocket
-Renthal Reed/Windahm Twinwall bars with G2 Ergonomics handguards
-Boyesen Flexgrip on clutch side
-G2 Ergonomics Throttle tube with interchangeable cams and teflon lining
-Midwest Mountain Engineering clutch lever
-Faast Company Footpegs with anti vibration nylon insert
-Keihin carb comes stock. Jetted perfectly. Extra jets and needles included
-Tubliss Gen 2 setup front and rear. Never failed me. Pirelli Scorpion MX Extra X rear tire with one ride on it. Scorpion XC Mid Hard front (Pirellis superior version of M59).
-Bulletproof Designs Radiator guards
-Radiators professionally TIG welded on all seams and lateral reinforcement bars added.
-Aftermarket rear brake pedal tip with spring loaded folding feature.
-Nissin Brakes. Uses Honda pads. Easy to find.
-FMF silencer with Spark Arrestor. Stock silencer included.
-Enduro Plate license plate holder
-Lithium battery
-Hardwired with A'Me Heated grips harness. Features 3 heat settings. Grips included.
-Xtrig Shock Preload Adjuster
-CT STREET TITLE AVAILABLE
-Many stock parts included.
-66 Hours
-973 miles
-Selling due to broken femur while mountain biking.

MSRP on a 2020 is $10,499

Buy mine all setup for $5,500 obo

Located in Manchester, CT
Local Pickup only

Do you mind me asking what spring rates you are using?

 

[Aborn299]

The forks are .50 and the shock is 6.0. They are sprung very light stock but once you put heavier springs in you find the valving is just fine. A bike that needs a revalve only suggests a bad design to start with imho.

 

[gasser]

I'm interested in your bike. Sent you a pm

 

[ctrider]

2018 ec 300

Interested
Sent a pm

 

[Aborn299]

2018 Gasgas EC300

Sold. Thank you