20mm thread (04-early 06) front axle nut conversion

[Keg]

Due to many requests we have started to make a front Hex Head axle nut again to suit the 2004 - early 2006 bikes (20mm threaded axle). If you are not familiar with this, it converts your allen key front nut to a 'Yamaha style' 22mm hex nut. This means you can carry a Yamaha 22/27 spanner to take your wheels out and throw away your allen key.

http://www.mainjet.com.au/product_info.php?products_id=289&osCsid=2448056547d76b36e05658ed0731590e

Also see the spanner & nut kit available. http://www.mainjet.com.au/product_info.php?products_id=290

We also stock the later model kit to suit late 2006 - to current years with a 22mm threaded axle.

 

[moto9]

Due to many requests we have started to make a front Hex Head axle nut again to suit the 2004 - early 2006 bikes (20mm threaded axle). If you are not familiar with this, it converts your allen key front nut to a 'Yamaha style' 22mm hex nut. This means you can carry a Yamaha 22/27 spanner to take your wheels out and throw away your allen key.

http://www.mainjet.com.au/product_info.php?products_id=289&osCsid=2448056547d76b36e05658ed0731590e

Also see the spanner & nut kit available. http://www.mainjet.com.au/product_info.php?products_id=290

We also stock the later model kit to suit late 2006 - to current years with a 22mm threaded axle.

Nice...can you figure shipping to Hawaii...I might take 3 of them, PM me
TKS

 

[wence]

I have these on my bike, great setup. good with the spanner also as it does the plug and front and rear axle.
I also grabbed th eaxle puller for the front.
Cheers Mark.

 

[Brian]

Any way I can tell which nut I need with out pulling the axle out and measuring?

I have an 06 with zokes forks.

 

[wence]

If I were you Brian, I would PM Keg, He will know what to supply you.
He is not too bad a bloke either.
Cheers Mark

 

[Keg]

Thanks Wence,

Check freight here: http://auspost.com.au/index.html

It would be $10 or $15 for all internationally deliveries for small stuff. I think our web site tells you it is $20 automatically, but I manually charge it so I try to make it reasonable.

Brian, just take the axle nut out and measure the thread. It should be about 20mm or 22mm.

 

[Brian]

Last ride my front axle nut decided to disappear :/

Tried to order from the website and it is saying "No shipping available to the selected country". Is it true?

I'd really like to use a socket instead of an allen key on my front axle.

 

[GasGas]

Last ride my front axle nut decided to disappear :/

Tried to order from the website and it is saying "No shipping available to the selected country". Is it true?

I'd really like to use a socket instead of an allen key on my front axle.

I got the same message. I would like to purchase the shift lever.