Alternative NISSIN REAR BRAKE PADS

[smitten]

Hi,

I need to change my rear break on my GasGas300 EC 2011. I found out that the original are NISSIN REAR BRAKE PADS. I look online and they are quit expensive compare to KTM rear break alternative.

I would like to know if one of you know aftermarket rear break thta fit on my 2011?

Canada or USA order.

Thanks

 

[john r b]

2007 Honda CR will do as a cross over.

 

[smitten]

2007 Honda CR will do as a cross over.

So those one will fit? https://www.canadasmotorcycle.ca/ebc-x-series-carbon-brake-pads.html

Had you try it before?

Thanks

 

[john r b]

Sinterd pads are what you need . Others will eat rotors quickly.

 

[smitten]

Sinterd pads are what you need . Others will eat rotors quickly.

Ok. Thanks for info. I just found on the main page this info.
Brakes ?00 to Current Nissin ---- Honda CR Brake Pads ?87-?01

So I will go with Honda CR Brake Pads ?87-?01 to be sure

 

[john r b]

I can't say weather the 01' pad will fit. I do know the 07' pads will fit.
You will need 1 front and 1 rear pad sets.

 

[Mattnzl]

The pads (both front & rear) have been used on just about every Japanese bike at some stage! (ie: super common).
Rear:
CR125 1989-2001
CR250 1989-when they stopped making them probably!
XR250 1988-2004
XR400 all years I think
CR500 ditto
XR600 1991-2008
KX125/250 1995-2008
RM125/250 1996-2008
DRZ400
WR125 1998-2002
YZ125/250 1998-2002
etc etc.

 

[GGRider01]

For 2011 to 2015 ..
Front pads- EBC FA185
Rear Pads- EBC FA367

For everything before that, the post above mine is accurate which would be FA131 (rear) and FA185 (front).

You want sintered, if you want to be able to stop when your brakes are wet.

 

[smitten]

Thank you very much guys. I found what I was looking for.

https://www.canadasmotorcycle.ca/ebc-r-series-long-life-sintered-brake-pads-fa367r.html

Cheers

 

[Tbucket]

Rocky Mountain ATV
HAS THEM FOR 2011 for $ 10.