blue and yellow wire

[dukbil]

Unplug the blue and yellow wires start fine when cold but when warm sometimes hard to start,seen to rich have to give it throttle to start blows black smoke.Can I mount a toggle switch in line on blue and yellow wire start on lean setting then switch to race map? Thanks,Bill

 

[jeffd]

This might work - it depends on whether the firmware checks the setting value on "power up reset" or whether it is "polled" while the bike is running.

If it were me - I would try to fix the root cause first. Simple stuff first - like cleaning the air filter and making sure it isn't over-oiled. The fuel mixture can be trimmed to some degree with laptop software - I think your closest dealer is condotta's in wenatchee?


jeff

p.s. I think I recall that some crack the throttle open slightly when hot - flybars or one of the other regular guys can help you out here...