Cam timing 450 FSE

[Just James]

How do I time the cams on a 2005 450 FSE? The manual did not help much. On the cams there is a 1, 2, 3, and a dash?

 

[wa_ndro]

Hey mate they are the same setup as a DRZ400, I think I searched youtube when I did mine, there were quite a few good vids on there showing how its done

 

[wa_ndro]

just found the link I used:

http://www.thumpertalk.com/topic/718276-drz-valve-clearance-check-and-adjustment-plus-cam-timing/

 

[cal_tony]

The GG FSE 2003 service manual which is downloadable has one of the best guides to valve timing. It is the only GG manual I've seen with it clearly explained. It's even better than my DRZ service manual.

Tony

 

[sparkboy]

Can't find it!

The GG FSE 2003 service manual which is downloadable has one of the best guides to valve timing. It is the only GG manual I've seen with it clearly explained. It's even better than my DRZ service manual.

Tony

Hey Tony, I cant seem to find the '03 FSE Service Manual online. Are you able to provide a link?

Thanks.

 

[cal_tony]

Can't seem to find it either. I downloaded it about 3 years ago from info found on this site. Must have been taken down.

It was called GG svcManEngineFse2002,2003. It was just for the early engine but it did have the timing information as a line drawing that was not included in the 2004 manual.

Sorry
Tony

 

[cal_tony]

After further looking I did find the original link. It was from something I saw on the Supermoto Junkie website

www.gasgasmotos.es/rcs/manuales/pdf/2003/fse/manual_taller_fse03_eng.zip

This was where it was and their still seems to be a bunch of manuals there, so I assume it's still there.

Tony