Crankshaft GasGas EC200 -05

[gasgasec200]

Hello guys, I'm from Sweden and I got a big problem...

I need to buy a new "crankshaft" .. I dont know the english word but here is a picture

http://www.google.se/imgres?imgurl=...age=1&ndsp=22&ved=1t:429,r:19,s:0&tx=52&ty=58

Please help me, my dealer in Sweden said you have to buy a complete crankshaft u know, hope u guys know what I mean...

It's to expensive imo.

Does somebody know if there is any other bike that fits my bike? Honda,kawasaki,ktm,yamaha????

Hopefully sombody knows...

// kristoffer.

 

[Keg]

CR250 78-01 Rod Kit

http://www.offroadbikepartsonline.c...roduct_info&cPath=106_119_128&products_id=242

Wiseco WPR124
1984-01
http://www.wiseco.com/PDFs/WisecoCrankshaftsAndConnectingRods.pdf

 

[gasgasec200]

CR250 78-01 Rod Kit

http://www.offroadbikepartsonline.c...roduct_info&cPath=106_119_128&products_id=242

Wiseco WPR124
1984-01
http://www.wiseco.com/PDFs/WisecoCrankshaftsAndConnectingRods.pdf

Great stuff mate, are you "sure" this stuff fits? Because the dealer in Sweden said it's for 250 or 300, dont remember, maybe they said both..

thanks!

 

[mattholew]

If you need a whole crank you will need to find another gg one. If you just need a rebuild with a new rod and big end bearing you can get the Honda CR250R rod kit for 1984to2001. The GG 200, 250 and 300 use the same rod and bearings, but different cranks.

 

[gasgasec200]

If you need a whole crank you will need to find another gg one. If you just need a rebuild with a new rod and big end bearing you can get the Honda CR250R rod kit for 1984to2001. The GG 200, 250 and 300 use the same rod and bearings, but different cranks.

VERY nice INFO. did u do the same?

I saw your thread.... did it fit nice?

 

[gasgasec200]

Hey I update here in case someone got same problem..

yes it's the same Rod in 200, 250 and 300.. a honda rod..

 

[mattholew]

VERY nice INFO. did u do the same?

I saw your thread.... did it fit nice?

I ended up not having to rebuild mine. I took it to a local highly respected mx mechanic and had it evaluated. He said the crank was in fantastic shape so i did him the favor of letting him replace the crank bearings, seals and reassemble the engine. He did a fantastic job and the engine is now back in the frame. As soon as I get my wheels back from the powder coater i can lace them up and go for a ride!