Does this sound come from clutch or powervalve?! Help??

I am no expert, but it sounds like some piece of plastic is vibrating (rad guard, side panel, skid plate). Try pressing on a few things while revving and see if that fixes it.
 
Almost sounds like the kick start gear hasn't fully retracted and is dragging against the idler gear. The only way to know for sure is to pull the cover.
 
Thanks a lot for the replies!
I tried looking around for loose parts while revving but nothing was loose. Could be the kickstarter but don't know. I took the whole clutch case out but didn't really inspect the kickstarter yet. I'll try to rebuild the kickstarter and clutch and see if the noise still continues.
Kind of weird that it started making that noise right after the wheelie crash. Didn't really expect anything else but plastic/silencer damage.
But great to see that this site could actually be helpful!
 
In the video, you can see where you were holding the lever before it popped back.

The return spring would be weak.
 
An easy way to tell if it is the pipe is to put your foot on it an put pressure on it to keep it from rattling.
 
Hmm, I checked the pipe but it seemed to be alright. But now when I think about it, the pipe got quite a hard hit, since the bike fell on the right side. I think I should check it again lol. Should've checked it better before opening the clutch case
And thanks for the replies again!
 
You must log in or register to reply here.
Back
Top