Flexx bars bolt hitting brake line/fitting

[shang]

For those of you running fasst flexx bars. Did any of you have a problem with the bushing bolts hitting the brake line banjo bolt fitting? If so what did you do? I don't want to move my Lever to a different position because it's comfortable for me where it's at. Thanks!

 

[gasgasman]

You have to grind upper brake hose locating pin off and rotate the hose upwards.
You may have to bend the hose out towards the front of the master cylinder.

 

[shang]

That makes sense. I've bent the fitting a little but I'll hit the housing with a grinder next.

Thanks

 

[gasgasman]

You can order a pre-bent brake line from Galfer. I did this on my '11 bike.
You will need the "E" model.
You may not have to grind the pins off with the 90 hose.

http://www.galferusa.com/wp-content/uploads/2013/10/Custom%20Line%20Sheet.pdf

 

[shang]

Thanks! I'll try moving the existing line first I think.

I've never seen the Galfer order form. That's awsome!