GasGas 200 club

[Tbucket]

Post you setting and valuable info for the 200cc only

2011 ec200 Six Day

Carb 36 mm
PJ #40
MJ # 172
Needle DEK 3rd clip
SLIDE # 6
AS 1.5

V-force 3 reeds

Large volume power valve cover

Elevation: sea level to 700ft

Oil ratio 50:1 BelRay low flash point

Transmission oil Rotella T6

Gear ratio 13/52

 

[liv2day]

Post you setting and valuable info for the 200cc only

Hey...I'll join the club Probably need to move this to engine or intake sub forum, maybe one of the mods will do that.

Anyway, we have 2 '11 EC200s in the garage at home (mine and my wife's). Here's the skinny on 'em, note that both have the RB Head mod done:

Mine:
36 ASII carb (I think - need to dig back to be sure)
172 main
40 pilot
A/S 1.5
R1470 #2
7 slide
V-force 3 reeds
Elevation: ~800ft to 4000ft normally (3k-6k feet when riding Gifford)
Oil ratio 50:1 Amsoil Interceptor
Transmission oil: ATF ever 8 hours
Gear ratio 12/52

Wife's:
36 ASII carb (I think - need to dig back to be sure)
175 main
42 pilot
A/S 1.75
NEDH #2
6 slide
V-force 3 reeds
Elevation: ~800ft to 4000ft normally
Oil ratio 50:1 Amsoil Interceptor
Transmission oil: ATF ever 8 hours
Gear ratio 13/51

 

[roverhybrids]

I believe all 200's come with 38mm AS1 carbs......

 

[barossi73]

13 200
38mm as2(2screw cap)
175main
40pilot
a/s 1.5-1.75turns
slide#6
vforce3
nozh clip#2
0-1500ft 5-30C
40:1 castrol
13/50 gearing
No head mods,stock base gasket thickness

 

[liv2day]

I believe all 200's come with 38mm AS1 carbs......

Doh