House of horsepower pipe, guard, silencer

[daveec250]

I have one of Richards pipes, carbon guard, and silencer for sale. It came off my 2012 250r. Was run on the bike around the yard for maybe 20 minutes. Perfect condition. Pm me if interested. Can text pics. Thanks dave.

 

[daveec250]

Pics added. New condition. Dave

 

[fst96se]

Price?

 

[daveec250]

300 for the pipe, 100 for the silencer you pay shipping and you can have the guard.

 

[daveec250]

or PM me with a reasonable offer if you don't feel this is fair. Thanks dave.

 

[Jim_C]

or PM me with a reasonable offer if you don't feel this is fair. Thanks dave.

Are you willing to sell just the pipe?

 

[daveec250]

Yes sir. Pipe and you can have the guard. Please pm if interest. Thanks dave.

 

[daveec250]

Also willing to trade for a good functioning lectron carb. Dave

 

[daveec250]

All items are still available. Thanks.

 

[BigAl]

Does any 1 know the difference between the 2012 pipes and the earlier pipes? Is it just the mounting brackets or?

 

[gasser]

Does any 1 know the difference between the 2012 pipes and the earlier pipes? Is it just the mounting brackets or?

I've got a 2012 HOP pipe and silencer on my 2011 gasser. I made 2 flat extensions for the pipe mounts and it fit perfect like Richard (the HOP guy who built the pipe) said it would. He said the silencer wouldn't fit without a lot of work but what I did was cut the forward bracket off the silencer and about an inch off the stinger end of the pipe to get everything to line up. Seems to work great.

 

[Born2Ride]

Dave, just sent you a PM/email regarding the exhaust items.
Thanks, Dan

 

[Batman Bailey]

2011 pipe

the 12 pipe will fit an 11 if you use a longer mounting bracket on top pipe mount,

 

[gasser]

Does any 1 know the difference between the 2012 pipes and the earlier pipes? Is it just the mounting brackets or?

I have a 2012/2013 HOP pipe & silencer on my 2011 250. I made simple flat extension pieces for the pipe rubber mounting brackets. Very simple and it worked great. The silencer is a different story. I ended up cutting about 1 inch off the stinger end of the expansion chamber so the rear bracket on the silencer would line up with the rear mounting point on the frame. I also had to saw off the front mounting tab on the silencer so it would clear the frame.