Is this power valve lever plate wrong?

[mark250ec]

This is the power valve lever plate position when I took the right side cover plate off.
The bike is a 2011 250ec. I noticed on other posting that the linkage rod is in the low position at rest (PV closed). Mine is opposite
Running bad also.....got a race this weekend so need to fix if wrong.
Help

 

[wasp4banger]

Looks like it is stuck open to me.

 

[gasgasman]

Take the allen bolt off the bell crank and see if the actuator rod drops down.
If not, the power valve governer is stuck.