Jakes Clearance Parts

Jakobi

Jakobi

Super Moderator
Gas Gas folk,

I'll be having a sale of sorts. Parts are located within Australia so not sure how overseas postage will go price wise. I'll probably edit this post a few times updating what I have, what I don't, what other things I find.. and as I decide what prices I feel are fair.

So far we have..

TTX Inserts (I'll insert kit number) to fit Sachs OC 48mm legs. All parts included (carts, .46kg/mm springs, documentation). Recently serviced.

TTX Shock spring 5.6kg/mm available.

More to be added.
 
Last edited:
Sorry I haven't updated the listings with part numbers and documentation, or pictures. I'll try and get onto it tonight.

Just off the top of my head I also have the following.

2013 EC seat pan, foam and cover both showing wear across the knee area.
Motoseat seat cover to fit. I imagine it would fit 2012-2017 models. AS NEW; never fitted.
2014-2017 brake lever, bushing, etc. Retrofits to 2012-2013 models to sit outside the frame rather than snaking between the frame and cases. NEW; never installed.
2010-2011 Fuel cap. NEW
5.4kg/mm spring to fit Ohlins 888 (will add measurements).
2011 EC front fender.
2010 EC300R cylinder and head (need to add hours used, believe under 150hrs)
Red anodized S3 stars head, various inserts (250cc: silver/300cc red/silver/black).
Complete set of white plastics for 2013 EC; upper and lower radiator shrouds complete with OEM stickers; includes headlight shroud, rad shrouds, side number plates, front fender, rear fender, and fork shrouds; ALL NEW
 
It's sitting on top of my 2018 fender at the moment shawry! Bit different to the newer ones (hasn't got the channel for the brake lines). Was tossing up putting it on but may just run the headlight yet.

Might end up throwing the whole plastics kit onto the 13 before I move her yet too. Options options.
 
Shiny bits..

Ohlins FGGG 12830
Fits: EC 250/300 Sachs fork 2009-2012

Showing some wear on the spring perch bushing. I have replaced them once while in use. Haven't been used in ages. Carts bled up well however low on N2 pressure at present, but will put 5 bar into them prior to going to a new home.

.46kg/mm Genuine Ohlins springs also to go with.

20180911_094856_zpsiaaxu2hy.jpg


20180911_095005_zpsspjws5vd.jpg
 
Cylinder has around 150-160hrs run time on it, so it's done a bit of work. Sorry pics don't show the coating very well. All in tact, still crosshatching visible in areas.

20180912_122638_zpslmaepnai.jpg


20180912_122237_zpsfhnsayhe.jpg


20180912_122620_zpshettuvcn.jpg


S3 Head and 3 inserts

Black insert appears to have a small mark in the squish band, from being in storage.
20180912_122332_zps6rbpv958.jpg


Is very nice!
20180912_122407_zps9bmsnapy.jpg



OEM head

20180912_122455_zpsrutfpdum.jpg


20180912_122502_zpstomrmlet.jpg
 
I'll check what I paid for it and get back to you. Have been considering putting it on my 2013 prior to sale but I think I'd rather let them go separate.

Where are you Scruse? I'm in Australia, so imagine international postage on a big carton could be costly.
 
Only the tank shrouds (upper and lower) have plastics. The rest are plain jane white plastics.

The sticker kit is the 2013 Racing model

Image courtesy of cycleworld
2013_GASGAS_XC_300.jpg
 
I should relist everything in the initial post too, to make it a bit easier..

Also have a gutz seat cover to suit the 07-11 model pans!
 
You must log in or register to reply here.

Similar threads

Jakobi
Another KYB SSS Thread - 2013 EC250R
5 6 7
Replies
135
Views
76K
5valve
5
Simmo737
2013 race 300 Aussie/Euro spec first impressions
2
Replies
25
Views
10K
Simmo737
Simmo737
REVERUP
First ride on my set up 2011 XC 300E
2
Replies
26
Views
15K
MrBlah
M
Back
Top