T thenutt New member Feb 12, 2009 #1 if my gas gas ec250 engine was to go bang, pistons or whatever?? could i then get it bored out to a 300cc, and roughly how much will it cost, thanks
if my gas gas ec250 engine was to go bang, pistons or whatever?? could i then get it bored out to a 300cc, and roughly how much will it cost, thanks
gasgasman Super Moderator Staff member Feb 12, 2009 #2 Do a search on this site. There are several posts on the subject. I don't think you can bore out the 250 cylinder to a 300. The power valve may hit the piston.
Do a search on this site. There are several posts on the subject. I don't think you can bore out the 250 cylinder to a 300. The power valve may hit the piston.
T thenutt New member Feb 12, 2009 #3 http://www.gasgasrider.org/forum/newreply.php?do=newreply&noquote=1&p=26481 ok thanks, will do some searches
http://www.gasgasrider.org/forum/newreply.php?do=newreply&noquote=1&p=26481 ok thanks, will do some searches
SpeedyManiac New member Feb 12, 2009 #4 I think you can bore it to make a 275 (better confirm though).
0 05MC250 New member Feb 22, 2009 #5 To go 300 you will need a new jug My dealer just quoted almost a grand for jug, piston & gaskets
