Longer shift lever for the FSE???

[McGuiver]

Anyone know who makes a longer shifter for an 05 FSE? My size 13's have a tuff time getting under the stock lever! Thanks!

 

[eff]

Check to see if it is the same as the 2T's.

If so you can get a longer one from www.hdmoto.com

 

[McGuiver]

Those are NICE!!! Anybody know if the shaft size is the same??

 

[Leo]

The KXF/RMX shifter fit ok and are 1/2" longer. There are the OEM and many others.

But this hammerhead are the best and there +5mm +10mm ....

 

[eff]

Those are NICE!!! Anybody know if the shaft size is the same??

Yes. According the the 2005 FSE manual and my 2004 EC manual the shaft is the same part number.

 

[flopper12]

The KXF/RMX shifter fit ok and are 1/2" longer. There are the OEM and many others.

But this hammerhead are the best and there +5mm +10mm ....

What year RM-Z/KX-F did you take that off of? They were the same from 04-05 and then the RMZ was the same for 06 while the KXF got redsigned. I looked at a shifter from an 04 RMZ 250 and it looked different than the one in your attached pictures.

Let me know what year and which brand bike it came off of.

Thanks

Nick

 

[Leo]

What year RM-Z/KX-F did you take that off of? They were the same from 04-05 and then the RMZ was the same for 06 while the KXF got redsigned. I looked at a shifter from an 04 RMZ 250 and it looked different than the one in your attached pictures.

Let me know what year and which brand bike it came off of.

Thanks

Nick

The shifter is Dirt for KXF/RMX. That´s the only information in the label...
mine looks like these
http://www.motosport.com/dirtbike/p...-LEVER/?prodId=778985&sMMY=SUZUKI;RMZ250;2005

 

[flopper12]

I ordered a longer shifter from Smith's Powersports. I'll post a report after I get it on.