Motocross center graphics?

byost

Gold Level Site Supporter
Has anyone installed the "Factory Racing" graphics from Motocrosscenter on a 2011? I recently purchased a complete kit from them, Polisort plastics and graphics but when I unpacked everything I noticed the graphics GG part#
BF950000RCT2512 were labeled 2012. I emailed Mikel at MX center and told him, he sent another kit, same thing 2012. I know that I have seen a 2011 on this forum with these graphics on it but I don't see how the radiator shroud graphics for a 2012 will line up with 2011 shrouds.
 
Has anyone installed the "Factory Racing" graphics from Motocrosscenter on a 2011? I recently purchased a complete kit from them, Polisort plastics and graphics but when I unpacked everything I noticed the graphics GG part#
BF950000RCT2512 were labeled 2012. I emailed Mikel at MX center and told him, he sent another kit, same thing 2012. I know that I have seen a 2011 on this forum with these graphics on it but I don't see how the radiator shroud graphics for a 2012 will line up with 2011 shrouds.

They dont!
 
The kit I ordered was ref#11984. It was listed as out of stock but the sent me an email saying they could get it from the factory. I have tried to explain to them that the last 4 didgits of the GG part number are obviously for a 2012 but there seems to be a comunication gap! iimage.jpg
 
If you compare your part number and your reference numbers, it seems that one kit is graphics only and the reference number kit is graphics and plastics. Photos for the part number and reference number both show photos for a 2011. I will try to find the posted photo on this site of a 2011 with those graphics.
 
The kit I ordered was ref#11984. It was listed as out of stock but the sent me an email saying they could get it from the factory. I have tried to explain to them that the last 4 didgits of the GG part number are obviously for a 2012 but there seems to be a comunication gap! iView attachment 4983
Keep in mind the 2012 & 2013 four stroke are the old body bikes (2011 and older 2 stroke body style). Disregard if I'm not following this post correctly.
 
Visual aid

image.jpg

I was told by Mikel at MX center that the 2012 4 strokes used the same shrouds as the 2011 2 strokes, but this doesn't look right to me. Please excuse the inverted image!
 
Is there a separate graphic piece that gets applied separately to complete the shroud graphic? It looks like the 2011 style to me missing a piece of graphic along the seat area.
 
Is there a separate graphic piece that gets applied separately to complete the shroud graphic? It looks like the 2011 style to me missing a piece of graphic along the seat area.

Here is the picture from MX Center web site
httpwww.motocrosscenter.comecommerceimagesthumbs_cachekit_gas_gas_2012_carreras_mod2.jpg
 
That's the picture I was looking at and thought it looked very close but missing the part near the seat. How close are they when you compare / size them up to your shrouds?
 
image.jpg

Thanks guys, I finally pulled my head out of my ass and figured it out. It's actually three pieces per shroud. Once again sorry for the inverted image
 
I just want a bad ass set of graphics for the 2011 style bike that I can get in the USA for $150 or so. A complete set. I really like the factory graphics but have not been able to find them.
 
I just want a bad ass set of graphics for the 2011 style bike that I can get in the USA for $150 or so. A complete set. I really like the factory graphics but have not been able to find them.

Send an email to Motocrosscenter, they have this set for around $80 US but on the website it lists them as out of stock. This set is fenders and shrouds only NO side covers, which worked for me because I have number plates.
 
Back
Top