Rick
New member
Is any of the local GasGas community planing on racing this event this coming weekend?
http://www.ama-d36.org/Raceinfo/3078_2010EnR01Flyer.pdf
http://www.ama-d36.org/Raceinfo/3078_2010EnR01Flyer.pdf
Nor. Cal Sawmill D-36 Enduro
- Thread starter Rick
- Start date
Brian
New member
Some day hopefully. Have to build up to it.
I might do my first race (HS) at Hollister this weekend. Haven't decided if I am going to do it for sure or not.
http://www.hhora.org/flyer/2010 Wild Wabbit.pdf
I might do my first race (HS) at Hollister this weekend. Haven't decided if I am going to do it for sure or not.
http://www.hhora.org/flyer/2010 Wild Wabbit.pdf
Rick
New member
What class were thining? Sounds like a good time....it could be dusty, but if we get some rain this weekend...should be nice. Looks like you don't need a AMA card for that event, just a Hollister club card?
I gotta start sometime....to tell you the truth, the last time I rode was in Mexico, and that was for one day. This enduro is not a time keeper, only 70 ground miles with a pit at 33 miles or so....with the recent rains, should be NO DUST! All Velcro baby
I gotta start sometime....to tell you the truth, the last time I rode was in Mexico, and that was for one day. This enduro is not a time keeper, only 70 ground miles with a pit at 33 miles or so....with the recent rains, should be NO DUST! All Velcro baby
Brian
New member
B-2 or C-2. I've never ridden upper park where it is being held but I'm thinking it won't be too technical. I haven't found anything in HH that I had much trouble on and I've been given the full tour of the "goods". So it's more of a question do I think I can last 1.5 hours or not. Or if I think I'll be quick enough on the fast sections, I only recently picked up the speed on the fire roads/double track. Yea no AMA cards or anything just the HHORA membership. I hear the HHORA races are good starters cause most of the fast guys are at the d36 races...less pressure.
I'm thinking maybe later in the season I'll try a d36 family enduro.
I'm thinking maybe later in the season I'll try a d36 family enduro.
Rick
New member
I've raced HH a few times at D-36 cross counrty events, the upper ranch....there is some very cool single track if they use the good stuff. The stuff through the oak tress can be very good as well. We used part of the motocross GP track, as well. There is a big a$$ drop, like "Gravity Cavity" that is alot of fun.
Beware of sandbaggers
being that the D-36 Cross Country has taken a week off, there could be a big turn out....
Beware of sandbaggers
being that the D-36 Cross Country has taken a week off, there could be a big turn out....
Rick
New member
I did a quick weather check last night, still no rain down here in the valley. 3am came pretty quick, finished packing and hit the road. I had a 3 hour drive ahead of me. I was about half way and it started to drizzle, the closer I got to Lakeport, the harder it started to rain. I found my way to the check in area, and it was coming down pretty good. I met up with MikeH and his riding buddy. After a quick, "hello" I made my way to the sign up area, just was I was about to sign up....they called the race....to much rain.
Ohhhh well, another day. A quick walk back to the truck, talked to Mike for a few and headed home.
At least i don't have to wash my bike ....it was looking to be a true mudder!!!
Nice meeting you Mike and your freind. We'll hook up another day.
Ohhhh well, another day. A quick walk back to the truck, talked to Mike for a few and headed home.
At least i don't have to wash my bike
....it was looking to be a true mudder!!! Nice meeting you Mike and your freind. We'll hook up another day.
jefgil123
Silver Level Site Supporter
Hi Guys-
I rode the Crosscut on Saturday and had fun. Too bad you got rained out !
Maybe we'll ride it on May 1 ?
Jeff
2001 Blue EC300
(BTW- Mike, I took the two shims out from behind the powervalve spring ,
and it made it smoother from right off idle. That and the CCK needle work
for me really well)
I rode the Crosscut on Saturday and had fun. Too bad you got rained out !
Maybe we'll ride it on May 1 ?
Jeff
2001 Blue EC300
(BTW- Mike, I took the two shims out from behind the powervalve spring ,
and it made it smoother from right off idle. That and the CCK needle work
for me really well)
Rick
New member
MikeH,
Not sure if I'll be able to make the 1 May race.....If all works out, I'll be up in the PNW riding w/ Roostafish.
Jefgil123.....I'm sure Saturday was much better, it was flat out raining on Sunday and would have made for some tough trails.
Change Gears:
We really need to look at getting the NorCal / Nevada GasGas riders together for a weekend of riding and bench racing. What do you guys think? If that sounds do-able we could start a new thread.
Not sure if I'll be able to make the 1 May race.....If all works out, I'll be up in the PNW riding w/ Roostafish.
Jefgil123.....I'm sure Saturday was much better, it was flat out raining on Sunday and would have made for some tough trails.
Change Gears:
We really need to look at getting the NorCal / Nevada GasGas riders together for a weekend of riding and bench racing. What do you guys think? If that sounds do-able we could start a new thread.
Brian
New member
I think that would be a great idea.
Similar threads
