OBIE link guard

gasgasman

gasgasman

Super Moderator
Staff member
My rear shock is taking a beating from crossing logs etc.

No one ( that I know off) makes a link guard for the newer GasGas'.
After doing some research, I found the http://www.obielinkguard.com/
They don't make a GasGas specific guard.
So I purchased one for a BETA 250RR.

It mounted up very well.
I had to shorten the rear part of the guard 3/4". I also had to use a longer mounting bolt for the rear skid plate mount.

New mounting hole drilled for rear skid plate mount.


Hole drilled for oil drain. The two mounting bolts fit between the frame with no clearance issues.


Shock not hitting plastic plate.




 
Nice work!
What was the $?
I have a p3 bash plate,which uses a rear mount which cups the rear chassis rail,so most likely id need to butcher it some to make it fit.
 
The guard is $44. It is some tough plastic.

You do need a flat surface for the guard to bolt on to.
 
This is a sweet solution! At $44 it's a better deal than building your own like I've been doing. Thanks for taking the risk to try it out and thanks for sharing!
 
I don’t see why you need one on the old gasser? When you compare the old with the new linkage you will see that the old style is different and will not touch any obstacle.



Gesendet von iPhone mit Tapatalk
 
You must log in or register to reply here.

Similar threads

P
Pampera 400 tail light/tail tidy/rear fender extension thingy.
Replies
1
Views
90
Hellcat
H
Anders
Contents in the resources section
Replies
0
Views
107
Anders
Anders
M
2021 Gas Gas EX300
Replies
1
Views
3K
Moto7man
M
farmerj
Little Things That Make a Difference (add yours)
Replies
2
Views
3K
gasgasman
gasgasman
N
Rear rotor too big
Replies
4
Views
3K
Noobi06
N
Back
Top