Parting Complete EC300

[risk74]

Parting Complete EC300 New Parts Added!

After much thought I have decided to part out one of my 2011 EC300s. Bike was rebuilt from the frame up (engine as well) this spring and has seen 30 hours since. Below is a partial list of some parts, but everything will be available.

Crank rebuilt by Ken O'Connor racing
Replated cylinder
Ohlins TTX shock
Silicone rad hoses with aftermarket cooler
Front and rear brake setups with new braided lines
Plastics and seat
S3 head with various inserts
Trusty adjustable power valve cover
Some electric start parts (flywheel, engine covers, subframe)
House of Horsepower pipe and silencer!

Will work on getting some pics on an image hosting site, but for the time being I can send them via text message. PM me through this site with parts requests. If you contacted me earlier and I did not have the parts, I may have them now due to the decision to part this machine, feel free to contact me again. Thank you.

Kris

 

[SS109]

PM sent.

 

[risk74]

PM sent.

And replied.

 

[frankinberg]

How much on the shock and powervalve cover

 

[risk74]

How much on the shock and powervalve cover

PM sent. Thanks!

 

[Bryan]

pm sent. thanks

 

[chopper]

PM sent on frame and swing arm.

 

[Thompo]

PM'd for Estart bits

 

[risk74]

I'm trying to be as fair as possible selling these parts on a first come first serve basis, but as I have had several requests for the same parts I am going to go in order of initial contact. If you don't want a part, let me know so I can move to the next person on the list. Thanks!

 

[risk74]

2011 EC300 More Parts

More EC300 stuff, click on the links to see the photos.

Complete seat, Gutz tall foam and seat cover, minor wear and tear on cover, seat pan is very good no cracks.

https://photos.app.goo.gl/tyL4E74Sx3oMzvm27

https://photos.app.goo.gl/4pjmX3NyooRSwZyMA

$60 shipped in the continental US

Enduro Engineering rear brake caliper mount and rotor guard, very good condition, excellent protection for that rear rotor. $55 shipped in the continental US

https://photos.app.goo.gl/4ksrtfBPLdmWkFXUA

Vforce 3 reed cage. Excellent condition. Reeds were replaced in the spring, less than 30 hours since. $60 shipped in lower 48 states.

https://photos.app.goo.gl/99sKDTUvHdRSsgyaA

More photos available upon request.

 

[risk74]

parts and pics

Click on the links for pics

EC300 front brake master cylinder, excellent working condition. $45 shipped in the lower 48.

https://photos.app.goo.gl/zJSuza1DQN5Yu7uH8

BRP chain guide. Very good condition, plenty of life left, originally cost $90 without the mount, $45 shipped with the mount included.

https://photos.app.goo.gl/DXMKYUUxVspbrvsA7

https://photos.app.goo.gl/4qFwLwVUVou2GkRu5

LTR oversize powervalve cover, good for bottom end power. Good shape, a few small nicks in the aluminum, otherwise solid and perfectly functioning. $40 shipped in the US.

https://photos.app.goo.gl/TmLQ5g3n6aJi8X526

 

[risk74]

S3 head sold
Plastics sold
Electric start parts sold

Still have tons of engine parts, wheels, shocks and other items. Contact me with your needs

 

[ggrider94]

2011 gg part out

What do you want for the front wheel set?
Chad

 

[beenallicanbe]

Do you have rear wheel spacers


Sent from my iPhone using Tapatalk

 

[risk74]

Do you have rear wheel spacers


Sent from my iPhone using Tapatalk

I am sure I do, but most of them have grooves worn in them from the seals.

 

[JesseeS]

Curious if you had the front number plate/headlight assembly?

 

[Torq]

Reeds still available? If so I'll take them. LMK ASAP... trying to get bike ready for Colorado trip in a couple weeks.

 

[ec300 2013]

Hey
I need subframe
Please pm
Can u send me ur whatsapp number


Sent from my iPhone using Tapatalk

 

[risk74]

Please be sure to private message me if you need something, I don't check this board often. Thank you.

Kris