Quick Release seat

[biggstr6]

I saw a kit on a site in Australia to make your set a quick release.

Does anybody know if anybody in the US sells these?

 

[REVERUP]

I'm guessing you probably saw the one on the Main jet Motorcycles website.

Have seen it somewhere else, slips my mind now.

 

[REVERUP]

Oh, It may have been some were getting the Husky part and fitting it to their Gas Gas.

 

[gasgasman]

I got mine from Main Jet. Took about a week.
Very nice option to have.
Kit comes with a drill bit to remove the OEM bracket.

 

[Keg]

Just to update our distribution - US Kits can be ordered here: http://www.gofasters.com/index.php?m...4ff326740d64d1


It took a while to make these kits. We had to work out the right sized aluminium washer to put the right tension on the dzus clip.

We also use a Honda 1/4 turn Dzus clip as it is chrome and it locks with the d-ring perpendicular to the seat, unlike the dzus brand d-ring which is zinc and is a half turn around.

We include a drill bit just so you can't over drill the hole and mess it up.

We will send it anywhere in the world. I have them in stock. They are our biggest seller, just in front of the 22mm front axle nuts and spanner set. The spanner actually fits your 27 rear axle, the new 22mm front axle and it also has a welded 21mm on the back of the 22mm to get your 2 stroke plug out.


http://www.gasgasrider.org/forum/index.php

Make sure you check the second page too.

 

[john01]

That sounds like a neat set up I like it on my Husky's. How much does it run shipped to the USA? Hey why wouldn't gofasters pick up the units?

 

[GasGasDreamer]

FYI ONLY
These kits don't fit all years.

 

[EtienneNZ]

Hi all,

Just ordered the Quick Release Seat Cover mechanism / spanner / JD Jetting kit from Mainjet website. Will let you all know how I get on.

Cheers

 

[Keg]

Will send the kit today Etienne.

FYI ONLY
These kits don't fit all years.

07 upwards. Anything with a screw in the top of the seat.

How much does it run shipped to the USA?

Same as NZ $20 for small stuff. All orders are processed manually here, so I can check it and confirm freight before processing the transaction.

 

[EtienneNZ]

Guys, got the clip today and fitted it after work. Very easy with great instructions. Five minute job. Highly recommended!

 

[EtienneNZ]

Forgot to add - thanks for the great service Keg!

 

[Keg]

No worries mate, enjoy.

 

[djroggen]

http://www.gofasters.com/index.php?main_page=product_info&cPath=89_96&products_id=6390&zenid=3c7c2d75388bdd8ff54ff326740d64d1
GoFasters has them.

 

[biggstr6]

Cool , I was hoping they would import them . I need to put together a small order of odds & ends next week.

 

[john01]

That is cool I will need two sets myself.

 

[biggstr6]

Two Sets John ? I knew your son was taking over the 2010 300 , did you get you a 2011 ?

 

[john01]

Yes I gave him the 2010 300 and I'm thinking I gonna get the 2011 300 for me. But if the 2011 200 if it's as light as I have read it may be my next GG. You happen to know how the 200's pull low/med?

 

[biggstr6]

not really. I bought a 04 200 ,but never really had a chance to try it out. I hear they have pretty good low end. Mine Had some carb issues I never sorted out before I sold it.