Radiator Braces

[tonyraft]

Hi everyone ! Well just ordered my self a 2019 ec300 , was just wondering what brand radiator braces you guys that have 18/19 bikes are using ? Cheers Tony

 

[gg3]

https://www.as3performance.co.uk/gas-gas-ec-xc-250-300-2018-as3-radiator-rad-guards-braces/
Fitted these.Not as sturdy as others but simple & allow the stock fins to be retained.

 

[Cox76y]

I have the ptech braces. Seem to be good in all respects so far.. I also kept the standard fins in..

 

[shawbagga]

AXP. Similar to AS3 & P-Tech.

 

[RudolfHucker]

Bullet Proof Designs make the best guards I have ever used. Machined from billet and make the rads very solid indeed.

 

[CDN Rick]

Enduro Engineering

 

[fred99999au]

I have P-Tech on my 18. Had to odify the stock fins to fit, but they are solid.

 

[MotoHead]

I just installed the AXP braces, I like their design and fitment was almost perfect. Only slight issue I had was one of the inner brackets was interfering with the upper radiator hose (the short one that goes through the frame and connects to the other side). So I had to ground that out a little on the bracket to provide clearance.

 

[tonyraft]

Well after much searching ,went with P-Tech , arrived in 12 days from Estonia fitted good time will tell if they are going to be good !