Rotor - magnet play

[5valve]

Just pulled the plastic electric cover, and to my surprise, while 2 hrs of riding ago it was OK, now I can feel the magnet has a bit of up/down play.
Main bearings, I reckon.
So the bearings and seals + gasket set, for starters, I suppose.
Will see the surprises avaiting, when I dig in.

 

[5valve]

Short clip of bike idling, and RH side breather tube puffing smoke.

2nd part of video, flywheel radial play. (turn up volume)

https://www.youtube.com/watch?v=gqW0FSZ51Ow&feature=youtu.be

Read a few topics, will go for local bearings, but its a '08 bike ('07 plastic set equipped for demolition), first model to be introduced with 2RS ball bearings.
Have no clue as to what is currently inside.

This was found in older topics:

As fitted to my 02 EC300
1 x SMALL END BEARING INA KBK 18x22x22
1 x LHS CRANK BEARING SKF NJ206ECP - C3
1 x RHS CRANK BEARING SKF 63/28 - C3
1 x LHS CRANK SEAL KOK 20x35x6 - VITON
1 x RHS CRANK SEAL KOK 38x52x7 - VITON
1 x COUNTERSHAFT BEARING SKF 6305 - C3
1 x COUNTERSHAFT SEAL GENERIC 30x40x7

Some will apply, but mains are a concern. Would take experience from post '08 models non OEM bearing application.

 

[bowhunter007]

This video is private? Check your You-Tube settings

 

[5valve]

Hope it works now.