show off your GasGas
- Thread starter bonkeye
- Start date
gasgasquebec
New member
My 'o3 EC250 with 'o6 Oem plastic set
-Revalved (trial-enduro purpose) forks by Stadium (stock rear)
-Woosner forged piston
-Cycra Handguards + rental Fatbar
-Scott handlebar top clamp without sterring damper
-Flatland skidplate and rad guards
-Guts Tall seat/cover combo
-Spider Grips
-Moose pipe armor
-Fmf gnarly header and power core II silencer
-FastWay wide Pegs Low position
-Boyesen carbon reed valves
-Talon front sproket Supersprox rear
-Hd tubes (rear trial tire most of the times) Knobby sometimes
-DT1 air filter and KTM dust cover
-KTM XC-F kickstarter
-Allballs
suspention/swingarm bearings
-Wave front rotor+stainless pins F/R from ''racediscs'' W/EBC ''R'' pads
-150 hours/season
-Revalved (trial-enduro purpose) forks by Stadium (stock rear)
-Woosner forged piston
-Cycra Handguards + rental Fatbar
-Scott handlebar top clamp without sterring damper
-Flatland skidplate and rad guards
-Guts Tall seat/cover combo
-Spider Grips
-Moose pipe armor
-Fmf gnarly header and power core II silencer
-FastWay wide Pegs Low position
-Boyesen carbon reed valves
-Talon front sproket Supersprox rear
-Hd tubes (rear trial tire most of the times) Knobby sometimes
-DT1 air filter and KTM dust cover
-KTM XC-F kickstarter
-Allballs
suspention/swingarm bearings-Wave front rotor+stainless pins F/R from ''racediscs'' W/EBC ''R'' pads
-150 hours/season
stainlesscycle
Site Sponsor
bought it 4 weeks ago or so. snce this pic was taken, i've changed, pipe, barkbusters/triple tree/tires/pv cover/skid plate..
also, i painted clutch cover with rustoleum bed liner, which has held up well and looks good.
Last edited:
thumperrider1
New member
Here's my '11 Six Days 250 that I sold last month. Hoping to be on a new ride in the spring if all works out.
roverhybrids
New member
Here's my '11 Six Days 250 that I sold last month. Hoping to be on a new ride in the spring if all works out.
Where did you get these graphics? BTW awesome looking bike. You looking for a 2012 GG model?
jhendr3702
Silver Level Site Supporter
THAT LOOKS AWSOME!, just wish i could afford a 2011 model.... one day though! lol when there 10 years old
thumperrider1
New member
PG Graphics did the graphics. I had them use the Nambo template and swap some of the colors up added a few personal touches. They came out awesome. I'm going to come up with something nice for the 2012 since I intend to build one up for next season.
I'm sure PG can come up with something similar for any gasser.
motogroove
New member
thumperrider1
New member
motogroove
New member
barkeater
New member
The young fella who did the fabulous chalk art on the driveway back in 2003, when this yellow beauty was uncrated, is getting ready to ride my EC200. Time for me to hop on the MC250 we've been saving. The 2005 MC250 has been quite the trailer queen. She even entered a bike show in 2011... didn't win anything, but it sure gave the HOG guys something other than a Dyna Wide Glide with flame paint on the tank to look at. (The EC200 won 1st in the performance class in 2006 at the same bike show.)
Last edited:
reiterrider
New member
This bike looks better with age!
Metalefty
New member
I'm surprised nobody commented on the "4 Stroke" sticker on the swingarm yet.
