Transmission gears and shift forks for 2000 xc250 wanted

[70455gto]

Need transmission gears and shift fork rods for my 2000 xc250.

Got a used bike and the transmission is grenaded!


Contact redronley@gmail.com.

Thanks!!

 

[gasgasxc]

Ow.
Ive never seen that kind of damage on any bike transmission.
Musta tried to ride it out of wherever the thing started coming apart at.

 

[70455gto]

I dont know what caused it to fail, PO did not disclose.

Needle bearings were everywhere.

 

[Zman]

There is a gear set on Ebay from a 2009. I think it will work in the older bikes but would like another member to confirm.
http://www.ebay.com/itm/GAS-GAS-EC3...ash=item3ac9669c6e:g:1SoAAOSwIgNXohMK&vxp=mtr

You should also check with this member too.

http://www.gasgasrider.org/forum/showthread.php?t=22228

 

[70455gto]

Yeah, it looks like the 09 may work. I don't know yet why it failed, would hate to grenade another gear set!

Ill compare stack to BOM fiche to see if clip was missing. Needle bearing pins everywhere.

Ill start a technical post in another sect.

Need parts!

 

[Jacob 'Berg]

I would check and/or replace the shift forks and shafts, and give the shift drum a close look as well.

 

[70455gto]

Just bought a complete bottom end assembly from another member here.

Thanks for the advice!