I was re-packing my steering bearings today and a couple of the wire harnesses unclipped themselves when I pulled the bars off. Can someone tell me which wire goes in which?
see photo:
A = goes to the front brake lever, (black wires).
B = goes to switches on the left bar e.g. lights, starter, kill switch, (green and brown wires).
C = goes down the main wiring loom of the bike (red and blue with red strip)
D = has another small clip attached to it, and also goes down the main wiring loom (green and brown wires)
Thanks in advance.
see photo:
A = goes to the front brake lever, (black wires).
B = goes to switches on the left bar e.g. lights, starter, kill switch, (green and brown wires).
C = goes down the main wiring loom of the bike (red and blue with red strip)
D = has another small clip attached to it, and also goes down the main wiring loom (green and brown wires)
Thanks in advance.
