Wild hp 300 sprocket Carrier interchange

Andy92

New member
Wondering if anyone has any info on if there is any other quads that share the same size/spline on the axle for the sprocket carrier, I know the banshee is also a 25 spline but not sure if it is the same diameter shaft. If anyone can share any info it would be greatly appreciated!
 
TRX450R axle swap in wild hp 300

After months of searching the internet for rear brake parts, sprocket carrier and different sprocket sizes with no luck I noticed the TRX450R takes the same axle bearing, lucky for me I have a 2004 trx, so I started doing some measuring and decided to disassemble both quads and see if the trx axle and components would fit. What I determined is everything fit right on even the caliper mount. The only thing I had to do was grind about 1/8?-3/16? off the outside of the brake disk carrier.
 
I recently talked to one of the fellas at Durablue about an axle on my wild 300.
The axle itself was based on a Honda trx400ex unit. Of coarse some dimensions were changed but its a good starting point to figure out interchanges.
 
Back
Top