Wiring loom

[spooly]

I have been doing some wiring and I cant remember the correct way to run the loom around my 07 300 frame. .Anyone have a diagram or picture. ?.

 

[gasgasman]

file:///C:/Users/Owner/Downloads/2007_ec_mc_sm_partlist1.pdf

Scroll down to pg64. Shows the basic layout.
Harness runs down the left side of the steering tube.
Then over to the shock tower, then to the right side into the air box.

Hope this helps.

 

[spooly]

file:///C:/Users/Owner/Downloads/2007_ec_mc_sm_partlist1.pdf

Scroll down to pg64. Shows the basic layout.
Harness runs down the left side of the steering tube.
Then over to the shock tower, then to the right side into the air box.

Hope this helps.

it won't allow me open the link. .it says it contains an invalid url or something like that. But thanks anyway

 

[spooly]

file:///C:/Users/Owner/Downloads/2007_ec_mc_sm_partlist1.pdf

Scroll down to pg64. Shows the basic layout.
Harness runs down the left side of the steering tube.
Then over to the shock tower, then to the right side into the air box.

Hope this helps.

Sorry I actually have the parts list and iv seen that diagram. .im ok as far as getting the lume running along the right horizontal strut of the frame on till I get to the vertical strut, where the stator wire joins.. do I go inside the vertical and under the horizontal at this point. ... and next is the correct track around the shock mount ?

 

[gasgasman]

The harness runs between the shock and the airbox.

 

[jprizz]

I just stripped down my 09. Here's a pic I took so I'd remember how it went. Hope it helps.

 

[jprizz]

Here's another shot looking down into the frame where tank sits from rider position. Harness runs along left horizontal

 

[spooly]

Here's another shot looking down into the frame where tank sits from rider position. Harness runs along left horizontal

Thanks jp that's exactly what I needed. .

 

[jprizz]

Alright! Glad it helped