Recent content by AZRickD

  1. A

    2018 recall for flywheel raplacement?

    I had the reflash and the battery cables done on the bike pre-sale. First I heard of a flywheel swap.
  2. A

    Brake parts

    Those are Honda CR250 components. Early 2000s (possibly late 1990s) vintage. Pins and other components are standard stuff Take the pads, pins, etc to your local shop and they will match them up.
  3. A

    Sherco or Beta?

    I tried to love the 4-strokes, but the 2Ts still called my name. The Beta was okay, but felt generally lacking. It felt old, I guess. And $400 for a kicker. The Sherco felt really good underneath me... ergos and handling, but my research amd polling of current Sherco owners concinved me it...
  4. A

    Spark plug 2018GP

    People are prefering a much reduced gap.
  5. A

    Guide to programming a 2018 EC computer

    Hummmmm. The online manual says it is permanently set to KPH or MPH. Bummer. From page 22 of the manual downloadable from Moto Center: https://gasgaspartshouse.com/tech When the motorcycle is started, the display panel is activated and remains on. The dashboard will display the normal mode...
  6. A

    Guide to programming a 2018 EC computer

    I'm looking for a quick tutorial to set the specs (KPH to MPH, 24hr clock to 12 hour clock, etc).
  7. A

    New Goldentyre GT 369KX "Taddy" Gummy Rear Tire

    How bad?? Second-worst ever... to the same place and post-rain race from 2010.
  8. A

    Milage gasgas ec 300 2019

    You sad little West Strayan:
  9. A

    Milage gasgas ec 300 2019

    I ran my tank to reserve just after I got it back in the truck. Reserve on my 2018 XC300 is 3-quartz. I refilled and checked my GPS ? 28 MPG on quick, desert single track (not much sand wash). So, 72 miles per tank.
  10. A

    will 2019 map switch fit 2018

    What are the part numbers for the 2018 and 2019 CDIs ??
  11. A

    Gasgas 300 2019 ride review; true test

    Rekluse basket soon to be added to my CX Rekluse. My clutch was quiet before the Rekluse. Noisy at low RPM and high load.
  12. A

    XC vs EC suspension

    Here is the stack from my 2018 XC300. We removed 4 shims from the stack.
  13. A

    What fork springs are you guys using for your specific weight?

    My tuner and I have been in discussions with RaceTech about 2108 Gasser springs. There is only one guy there (in the tech dept) that has dealt with the GG KYB issue. He has outfitted a few 2018 Gassers with springs and can advise you on spring rates. But he has to go with his personal...
  14. A

    G2 throttle tamer?

    I put an EC pipe on my XC300. Fairly mellow and linear.
  15. A

    Kyle Redmond?

    He didn?t do any post-ride commentary.
See more
Back
Top