I believe, but, can not confirm. The 6 speed transmission from the EC250/300 will
fit into your MC250 - 4 speed.
I believe my 1998 EC250SM started life as an MC250. It has the 50mm Marzocchi
forks, and I believe the EC had the 45mm forks.
I did not convert the 4 speed to 6 speed. Steve...
Not that you asked, but, the wiring harness I recently purchased was
BE250334004 for the Rieju models. I got it from Matto Cycle.
To get a brake light you would not need to do the AC/DC conversion
I mentioned above. I suppose you could tap into the existing harness and
make your own harness...
Likely your 2002 GasGas300 is either the XC or DE model if sold in the USA.
It did not come with the full wiring harness for the brake, turn and lighting.
This is how my 2002 XC300 was delivered. It came with a 2K2 stator and not
the 2K3 stator of the EC300 model.
I bought the complete...
.pdf files sent again, the '98 is a motor parts list only. Not a service manual.
I did include a '03 EC300 Service manual. Most of that should be applicable.
Ask if you need anything else.
Good luck on the rebuild.
I hope the uploads worked and I put them in the correct place.
I have lots of other GG related .pdf files of shop manuals and parts lists available.
Cheers. Jeff
slocalspode submitted a new resource:
GasGas Pampera MKII chassis Parts List - Parts list to the Pampera MKII Chassis / frame
Read more about this resource...
slocalspode submitted a new resource:
GasGas Pampera Motor Parts List - Parts list for the TXT and Pampera 125/250/280 motor
Read more about this resource...
There were a couple frame fractures I have heard of. The one I think everyone
posted about was Tami's Pampera during the Idaho SpodeFest. I was riding
in the same group with her. Her frame snapped about 3" back from the steering
head. They fixed it with box end wrenches and hose clamps. Enough...
Road legal depends on where you live. In Kalifornia they are not.
Fast? A Pampera is not made for speed. The motor is derived form
the TXT Trials motor with taller gearing, by just a little.
I've seen one do 55 mph and a bit more. At that speed you are asking
for an early engine explosion...