Bryan
Gold Level Site Supporter
I delivered my forks and rear shock to Les at LTR last Friday. (he just lives a few miles from me). He is going to build and respring the forks and shock. They have always been a little light for me. Time to get them right. 
While it is apart, it is time for complete chassis maintenance. The swing arm bolt was a royal b*tch to get out. The bearings are shot, go an order into Gofasters for their complete pivot bearing and seal set.
Gonna replace a bunch of fasterners and try to more that are the same size while I am at it.
Notice the wiring harness is a chaffed some, so I will have to track down a replacement and figure out what is causing the rub points.
I have had a trail tech computer for a few years, now I will finally mount it up.
While it is apart, it is time for complete chassis maintenance. The swing arm bolt was a royal b*tch to get out. The bearings are shot, go an order into Gofasters for their complete pivot bearing and seal set.
Gonna replace a bunch of fasterners and try to more that are the same size while I am at it.
Notice the wiring harness is a chaffed some, so I will have to track down a replacement and figure out what is causing the rub points.
I have had a trail tech computer for a few years, now I will finally mount it up.
