01 gasgas 250 ec jetting help

[acmetrapper62]

I have 01 gasgas 250 ec. I ride at around 1,500 feet ruffly. With 50:1 93 octane mix gas . It used to be 32 :1 and I want to change it to 50:1. The needle that was in it before was nozf with a 38 pilot and I could not read the other number for main jet. I have a needle laying around n1ef idk if it good for my bike or what jets to use with that needle . I just need some advise on what jet to go with the n1ef needle with 93 octane fuel 50:1 br8eg plug 1,500 feet

 

[hannesd]

have a look in the local jetting database.
look for the same bike, same altitude and se what they did and rear the comments on their setting.
http://www.gasgasrider.org/forum/showthread.php?t=2162&highlight=jetting+database

 

[Zman]

According to older posts the n1ef is similar to a n1eg which works very well for GG bikes. You will find lots of info on both needles.

 

[frankinberg]

I have had gasgas sense 1998 we always run ltr needle which is a ddk needle worked great in a air Stryker 1 round top 172 Maine 42 pilot ddk needle 2 nod from top it will rip