'03 EC300 Nissin front master cyl kit?

[(F5)]

My 02 and 07 were Nissin. Not to say PO didn't change them for Chinese stuff.

I bought an XR400 as replacement. Might have had to swap backing plate but calipers were the same. Common as and unloved dirty 4 stroke.

Be careful that you have freeplay at the lever. If there is not enough the return poet in the master cylinder won't open enough to release pressure. Or that hole can get blocked.

 

[brider]

I bought an XR400 as replacement. Might have had to swap backing plate but calipers were the same. Common as and unloved dirty 4 stroke.

Be careful that you have freeplay at the lever. If there is not enough the return poet in the master cylinder won't open enough to release pressure. Or that hole can get blocked.

Thanks, this is good stuff. It's all OEM parts, PO didn't molest the bike, just neglected it (sat for a long time). Did I mention the air filter had disintegrated to dust, so he wrapped the entire assembly (crumbly air filter and all) in a T-shirt? No idea if he ran it much that way, or if the filter crumbled DURING it's dis-use, but it fires up and runs fine.