1999 200 triple clamp question..

[jhendr3702]

got a bud who bought a 99 ec200.. the triple clamp looks really wierd.
it has gg stamped in it, but there is a boss where the bar clamps should go, and the upper triple has been drilled and a set of pro taper solid mounts are outside that boss to mount the bars..
also, there are no steering stops on either the upper or lower triple. it has the conventional marz forks..
anyone got a picture of what they should look like, or a spare set ?

 

[jhendr3702]

 

[gasgasman]

Someone drilled the extra holes to make the ProTapers work.

Can't remember if the fork tubes acted as the steering stops against the frame.

 

[jhendr3702]

Someone drilled the extra holes to make the ProTapers work.

Can't remember if the fork tubes acted as the steering stops against the frame.

he said the forks will actually get into the rads.. i was thinking the 00 i had had mounts and stops just like my 01, and those same forks..

 

[gasgasman]

Ok. It came back to me.
The head light strap around the fork tube acts as the steering stop against the frame.

 

[Rick]

The 99 45mm Zoke 3xxx clamps DO NOT have steering stop screws. GasGas man is correct. I just checked my old clamps and there is NO stops. The headlight staps act as the stop.
As for the top clamp, only one handle bar clamp bolt hole, stamped "GG" into the top clamp.

Do you want the clamps only? I'd like to move the entire front end.......let me know......PM me for a killer DEAL!

 

[jhendr3702]

i have sent this to him...
thanks guys

 

[H0TR0Dn]

Thanks Jay.

Rick I sent you a PM