andyec300r
New member
So I've removed about 330-340ml from my 48mm Sachs cartridge forks when I replaced the seals. Now I didn't measure the oil height before I emptied them but was told by the previous owner that 120mm was the air gap.
The thing is I had to put 600ml in to achieve an air gap of 120mm! Is this normal? (measured air gap with spring removed and fork collapsed)
(The fork was blowing through the end of the stroke before)
The thing is I had to put 600ml in to achieve an air gap of 120mm! Is this normal? (measured air gap with spring removed and fork collapsed)
(The fork was blowing through the end of the stroke before)