2010 GasGas FSR 250

[Berkyboy]

We just finished bolting together the Yamaha powered GasGas FSR250 that will be at the upcoming dealer show at the end of the month and i gotta say, "Me likey!!"

The bike has the new micro fusion frame, the taller FSR inspired fuel tank (less the fuel pump and ECU cut outs and fuel pump mods of course ,) new plastic, wave rotors, red hubs, black rims.

This beauty is without a doubt one of the best looking off-road bikes I have ever seen.

Tonite we take her out for her maiden voyage.

 

[gasgasman]

Photos.......we want photos!!!!

 

[blitz11]

I'm not that far away. I could come crash it to get the "new" off of it.

 

[GMP]

How did they integrate the hydro clutch?

Did you weigh it?

Damn I want one. I think it would be perfect for where and how I ride.

 

[Mark Berg - CPD]

a few things

It isn't a hydraulic clutch but very light feel cable.

We are about to head out and weight the bikes full of gas & oil.

Only the slow guys (Steve n I) are allowed to break them in....We had to tie up the fast guns J-dub (Justin), Tim Neinow, and Brian Hasslen in the back room. They wanted to head to the rocks and logs right away with them.

Pics coming soon

 

[MattR]

Looking forward to seeing some pics!!!

I agree Glenn, it would be a great eastern woods bike.

 

[Berkyboy]

click it

http://berkyboy.smugmug.com/gallery/9339650_Sbpmj#624737617_jGDhn

 

[gasgasman]

WOW
That is one beautiful bike!

 

[eff]

You can say that again.

 

[ScottyR]

Should I be afraid to ask the price?

 

[MattR]

click it

http://berkyboy.smugmug.com/gallery/9339650_Sbpmj#624737617_jGDhn

Fantastic pics! She's a beauty.

What is usually mounted in the lower hole in the picture below (look above lower frame rail in front of clutch cover)?

http://berkyboy.smugmug.com/gallery/9339650_Sbpmj#624738984_ybUB5-X3-LB

 

[Wiggy]

What's new about the new rear brake pedal ?
Does it now have a bearing in it like a KTM so it doesn't get "flogged out" ?

 

[mountain thumper]

What's new about the new rear brake pedal ?
Does it now have a bearing in it like a KTM so it doesn't get "flogged out" ?

it looks adjustable!
but im curiouse about tho empty hole..? looks like a sensor bung on my old probe

 

[eff]

It does look like a sensor:

 

[Berkyboy]

Without spending anytime researching it I would assume its for the Yamaha OEM dry sump oil return / supply lines (there is another bung identical to it on the other side of the engine) as the GasGas frame does not have a dry sump like the Yamaha WR frame would have had.

Picking up a Yamaha WR 250 from a friend later today to do some comparisons.

 

[bergerhag]

Beautiful beast!

 

[gasgasman]

for the Yamaha OEM dry sump oil return / supply lines (there is another bung identical to it on the other side of the engine)

The YZ has a remote oil tank. Those ports are for the oil lines.

The way I see it, a person can add an oil cooler and use these ports for feed lines.

 

[Rick]

Man.......both of the bikes look very nice! Wolf in sheeps clothing fur-sure!

It will be interstering to hear a comparison between the Yama version and the Spanish version of the WR powerplant in different frames, suspension, ect!

What is the nearest airport to fly into??? My gear is packed!!!

 

[gasgasman]

What is the nearest airport to fly into??? My gear is packed!!!

Directions to Bedford, Indiana:

Bedford is approximately 75 miles SSW (195 degrees) of Indianapolis. It is at the junction of 37 and 50 highways. Driving other than from Indy, you can check your map or set your GPS for Bedford to see the route you will take. If you fly into the Indy airport and rent a car, take I-74 south and at exit 4, take highway 37 south. Drive to Bedford, which, at 60 mph, will take around one hour and forty minutes.

 

[SideshowBob]

Holy crap that thing is amazing.