2012 pipe
- Thread starter Diggs345
- Start date
rubber Jonny
New member
I hear the pipe itself is the same shape but the mounts are different, not sure how different though, could be a few mm could be miles off.
Diggs345
Gold Level Site Supporter
rubber Jonny
New member
yeah, no problem!
Jakobi
Super Moderator
Sorry Chris,
Been tied up with other things and it slipped my mind. Just ran out the shed and specced it up for you now. The front of the can appears to very similar, in distance across, diameter of the pipe at the seams, distance from the lower mount to the seam etc. P3 lists the same part for 08-14 models, so I'd say its fair to assume the front will be right. The tab may need a different mount to the frame, but nothing that can't be shimmed out/tweaked.
The upper mount is different, and on the 13 is moved back in towards the frame more. Distances from the silencer join are very similar, however I couldn't accurately measure with it on the bike still. Eyeballing it, it appears the final stinger part may actually be welded on at a different angle on the newer pipes too. Again, couldn't measure but wouldn't be too hard to modify.
Let me know if you want any pics. I'll be playing bikes most of today.
Been tied up with other things and it slipped my mind. Just ran out the shed and specced it up for you now. The front of the can appears to very similar, in distance across, diameter of the pipe at the seams, distance from the lower mount to the seam etc. P3 lists the same part for 08-14 models, so I'd say its fair to assume the front will be right. The tab may need a different mount to the frame, but nothing that can't be shimmed out/tweaked.
The upper mount is different, and on the 13 is moved back in towards the frame more. Distances from the silencer join are very similar, however I couldn't accurately measure with it on the bike still. Eyeballing it, it appears the final stinger part may actually be welded on at a different angle on the newer pipes too. Again, couldn't measure but wouldn't be too hard to modify.
Let me know if you want any pics. I'll be playing bikes most of today.
Diggs345
Gold Level Site Supporter
You could always try the 10 one on your 13 
, only joking lol , pics would be good jake , if it's just a case of the two mounting points all is good , but if I have to start chopping the outlet pipe then I may just get a new pipe .
Mine is supposed to be stainless steel , so how come it's got rust on it .
, only joking lol , pics would be good jake , if it's just a case of the two mounting points all is good , but if I have to start chopping the outlet pipe then I may just get a new pipe .Mine is supposed to be stainless steel , so how come it's got rust on it .
