2018/2019 12v Power Connector

[RudolfHucker]

The 2018/2019 EC300 wiring diagramme (owner's manual page 16) shows a 12v power connector as part of the standard wiring loom. It is shown as "Salida 12v". I had assumed that it would be near the rhs radiator for a fan kit in the same way as KTM do. Trail Tech seem to supply wiring that connects directly to the battery for their fan kits.

Has anyone found one as I'll be damned if I can!

 

[Jakobi]

The 2018/2019 EC300 wiring diagramme (owner's manual page 16) shows a 12v power connector as part of the standard wiring loom. It is shown as "Salida 12v". I had assumed that it would be near the rhs radiator for a fan kit in the same way as KTM do. Trail Tech seem to supply wiring that connects directly to the battery for their fan kits.

Has anyone found one as I'll be damned if I can!

Quick look at the wiring diamgram. Appears to be the JST connector from the loom into the speedo unit.

 

[RudolfHucker]

Thanks, Jakobi,

I shall have another look and check with my voltmeter. It would be handy if it's up front as I want it for auxilliary led lights.

 

[RudolfHucker]

I have had a full check round and no sign at all near the speedo unit.

 

[Undertow]

Hi

I guess it might be the power feed to the ECU unit. If it is the connector "O" that you a referring to, then it connects to the connector "C". And in the previous page there should be a diagram showing the connector "C" being the power feed to the ECU circuit...