2018 XC/EC 300 (phoenix) part list?
- Thread starter dewenduro
- Start date
dewenduro
Gold Level Site Supporter
swazi_matt
Active member
is it just me or do others think the bikes come with the rear axle in the wrong way round?
My reasoning is that if you have the nut on the rhs and you keep hitting rocks the nut will not loosen. if the nut is on the lhs (as per the factory pics) if a rock hits the nut there is a good chance of it loosening it as it will be forcing it anti-clockwise (unless you are moving in reverse!)
My reasoning is that if you have the nut on the rhs and you keep hitting rocks the nut will not loosen. if the nut is on the lhs (as per the factory pics) if a rock hits the nut there is a good chance of it loosening it as it will be forcing it anti-clockwise (unless you are moving in reverse!)
Vindicator
New member
I didn't quite understand that yet as I've been reading that the actual bike you purchase comes with Keihin. Even on the technical specs on the GG page they mention the Keihin ( http://www.gasgasmotos.es/en/off-road/505-xc-300.html )
What about the CDI ? Kokusan ?
blitz11
Silver Level Site Supporter
21 mm carb on a 300? Yikes.
My XR-75 in 1974 had a 19.5 mm carb.
The Del'Orto site (http://dellorto.it/en/products/carburetors/) shows that carb, but here are the details:
Engine: 50-100cc, 2 stroke
Application: Motorcycles
Production place: Made in Italy
Venturi diam.: 15 - 16 - 17 - 17,5 - 18 - 19 - 19,5 - 20 - 21mm
21 mm would never flow enough air to satisfy a 300 cc 2-stroke.
I opened the manual, and it shows the 21 mm carb. wow. the drawing matches the part number above. Crazy!
My XR-75 in 1974 had a 19.5 mm carb.
The Del'Orto site (http://dellorto.it/en/products/carburetors/) shows that carb, but here are the details:
Engine: 50-100cc, 2 stroke
Application: Motorcycles
Production place: Made in Italy
Venturi diam.: 15 - 16 - 17 - 17,5 - 18 - 19 - 19,5 - 20 - 21mm
21 mm would never flow enough air to satisfy a 300 cc 2-stroke.
I opened the manual, and it shows the 21 mm carb. wow. the drawing matches the part number above. Crazy!
Jakobi
Super Moderator
Probably different depending on geographic. I know the Aussie 18 EC's have Keihins fitted. Haven't asked if the Delorto comes in the crate.
blitz11
Silver Level Site Supporter
SpirosZ1000
Member
Same here in Greece. Keihin pre installed but with different jets for homologation and the others in it's box for you to install them.
By the way from a short test ride I did the bike feels lighter and more nimble than my 2015.When the weather cools down a bit we will have the opportunity to have it for a ride at our trails.
By the way from a short test ride I did the bike feels lighter and more nimble than my 2015.When the weather cools down a bit we will have the opportunity to have it for a ride at our trails.
