Ryanhutch34
New member
Hey guys I got a 21 EX300 and looking to soften up the suspension up. Before I start tweaking stuff, are there general adjustments I can do to start out with? Thanks guys.
21 GasGas EX300 suspension
- Thread starter Ryanhutch34
- Start date
SS109
Active member
I hate to be the bearer of bad news but, this is a forum dedicated to the pre-KTM era of GasGas and current Rieju bikes.
That said, make sure your tire pressures are within reason (12-13psi roughly), your rear sag is set properly within range, and have the correct springs for your weight installed.
After that it's tweaking your clickers, fork height, and sag adjustments to find the balance/performance you're after.
That said, make sure your tire pressures are within reason (12-13psi roughly), your rear sag is set properly within range, and have the correct springs for your weight installed.
After that it's tweaking your clickers, fork height, and sag adjustments to find the balance/performance you're after.
