I have an '04 MC250 with a 2K3 stator. It recently pooped the bed and I replaced it with one from a 2015 Husky. Upon removal, I broke the tabs that hold the pick-up on the backing plate. I got a handful of rides out of some generous amounts of JB weld, but it finally broke loose. Does anyone know if you can get the mounting plate by itself? Or do I need to buy an entire stator? Does anyone have one I can buy?
2k3 stator mounting plate
- Thread starter Russhole
- Start date
(F5)
Gold Level Site Supporter
Like this? Edit cant attach, probably too big.
I got the whole plate with stator. Just keeping this for the pickup coil. I could cut it all off and send you the plate for cost of postage. But its from New Zealand so keep it in mind if no one has one closer.
And we're in semi lockdown so I cant walk into a post shop for a couple of weeks. And Freight is a bit slow international due to lack of passenger planes.
Try get local welding guy to tack it together. I've had that work for a while at least
I got the whole plate with stator. Just keeping this for the pickup coil. I could cut it all off and send you the plate for cost of postage. But its from New Zealand so keep it in mind if no one has one closer.
And we're in semi lockdown so I cant walk into a post shop for a couple of weeks. And Freight is a bit slow international due to lack of passenger planes.
Try get local welding guy to tack it together. I've had that work for a while at least
