300 2008 Wont start not even bump start

[Azlam denis]

Hello i have a 2008 300ec gas gas im driving it normally barelly hitting powerband im driving it at max of 80-90km/h last night i was on a chill drive after arriving home ive let the bike idle for 1 minute and after the next morning tried tot start it normally how i start it at kick normally the bike start at 2nd kick but this morning it doesnt started even from bp start it has spark i checked i even switched to a new spark plug it does give fuel i tried starting it even with another carburettor but still nothing , could this be because its flooded inside the engine ? Because i dont get the bike to “breathe” at 9000rpm ocasionaly? Anyone had this problem before ?

 

[Hellcat]

I don’t recommend letting a 2 stroke idle for longs periods of time . If your float valve is leaking by you could have flooded engine with fuel . There used to be a crank area drain plug on bottom of engine cases if you wanted to check . Should be a step Allen bolt with copper washer . Not the engine oil drain bolt . I think you might have other issues

 

[Azlam denis]

I fixed it, it was just flooded of smoke and oil after fixing this it was running nice and clean that was the problem the engine was flooded with oil and smoke that didnt exit from the pipe because i wasnt pushing it