Cant find rear spring for my GasGas

[ilovemymami]

Hi, i got the EC 250 Cervantes REPLICA 2011 bike, and i think there is a 888 ohlins ttx shock, i ordered from enduro engineering the spring they have 5.8 rate
[i have been told that it will fit my weight (105KG)] but the spring not physically go on to my shock, i checked the diameter and found out that i need a 68 mm diameter spring. where can i found online store that sell that?
Thnx, Daniel.

 

[Anders]

Hi, i got the EC 250 Cervantes REPLICA 2011 bike, and i think there is a 888 ohlins ttx shock, i ordered from enduro engineering the spring they have 5.8 rate
[i have been told that it will fit my weight (105KG)] but the spring not physically go on to my shock, i checked the diameter and found out that i need a 68 mm diameter spring. where can i found online store that sell that?
Thnx, Daniel.

I presume 5.8 is quite OK for your weight.
Your Cervantes has a Ohlins TTX shock. You need a spring for that shock, any Ohlins or Gasgas supplier should be able to help you.
Where are you located?

 

[ilovemymami]

: (

i'm located in israel, cant find any help here, looking for some online store.

 

[Jakobi]

The TTX shock (which you have) has a larger ID than the 888. True story. I have both shocks, and unfortunately have had to buy a few springs for each as well.

 

[Anders]

i'm located in israel, cant find any help here, looking for some online store.

In that case I would suggest
http://www.motocrosscenter.com or http://www.greenlandmx.com/

Both shops are in Spain.