Carb boot

[daveec250]

I noticed the rubber boot between the reed block and carb is cracked and sucking air. I have the 38mm round top carb. Is there a cross reference that anyone knows of? I used the search but didn't come acrossed anything. Looks similar to my wr boot. Thanks

 

[Zman]

Just call Boysen. They have them in stock and they are about $10.

 

[lynngarner]

Or go to Autozone, get the correct diameter radiator hose, and cut it to length. They work fine.

 

[daveec250]

Thanks guys. Will give both a try. Dave

 

[Zman]

The factory ones have molded in portions that mate with the recesses in the carb and reed cage spigots.

 

[daveec250]

I know. I think I'm going to call boysen tomorrow. Ask for gasgas carb boot?

 

[Zman]

yes and you can also read the model number off the reed cage.

 

[daveec250]

I'll have to check I think I have moto tassinari vforce reeds. Thanks for all the info.

 

[daveec250]

Just as a follow up. Boysen has the boot. Part number rb-1, 7.99. They also have it with new clamps rbk-1, 19.99. Fits my 38mm pwk keihin perfect. Thanks again for all the help. Dave