Crankshafts for ec 125 2011

[Yardenec125]

Hi,
I need to change the crankshafts and i wants to know if i can use another crankshafts from yz 125
Does anyone know it?

 

[Elvis74]

What happens?
Usually you can repair or rebuild it....


Gesendet von iPhone mit Tapatalk

 

[Yardenec125]

The bearing of the rod caught.
But it is possible to recover valuable parts of Gas gas and new Crank cheaper to buy

 

[Elvis74]

I don't think you will get a cheap 125 crank shaft, 125 parts are very rare. Here in Germany I try to get even specific 125 used spare part I can get.


Gesendet von iPhone mit Tapatalk

 

[RockefellerGG]

On my 250, A new connecting rod, and thrust washers cost around $100 and having the crank rebuilt and trued was about $100. What you are left with is basically a brand new crank, not some used crank with unknown origins.

 

[Zman]

Connecting rod kits come with new bearings and pins that press into the crank. They can be rebuilt and via welding if needed. While the YZ125 crank stuffers and bolts fit in the GG crank they are different enough that they do not cross over.

 

[Yardenec125]

I know there are sets of connecting rod with bearings.
I look for the crank itself because the plastic on the Crank bit and I've ruined the whole exchange.
I am looking for another motorcycle because of gas gas can not find on eBay or other websites

 

[Zman]

The plastic bits are call crank stuffers and they are the same as for a Yamaha yz125. I am not sure what part of the crank you reference as the exchange.