EE kick stand re locator kit for gas gas

[liamthom]

http://www.ktm-parts.com/19-400.html

It does what it is suppose to. it look great and that is really all there is to say about it. I have it on my bike, the only welder that we know is a friend of my dad who is just about the best in the state and we did not know or want to bother him with the mod with the oblong washers. for 10 bucks i would say it is well worth it, the one thing I would do is grind off the old clip as it gets in the way of tightening the bolt down. unless you have the swing arm off.

 

[scratch250]

Correct me if I'm wrong, but this only works pre-'12 bikes right?

 

[liamthom]

Correct me if I'm wrong, but this only works pre-'12 bikes right?

I have no idea, i know it works on my 2011.

 

[adv rider]

relocator

Any verification of this working on a 2012? Im ready to spend $$.

 

[bergerhag]

On the 2012, (at least the twostrokes) you only need to bend the spring mount tab sligthly forward. A bit of heat on it prevents it from breaking in the process. The 2012 fourstrokes had the older chassis, and it would work on them.

 

[desertgasser300]

On the 2012, (at least the twostrokes) you only need to bend the spring mount tab sligthly forward. A bit of heat on it prevents it from breaking in the process. The 2012 fourstrokes had the older chassis, and it would work on them.

Anyone have a picture of this for the 12 and later bikes?