Gas gas ec 200 throttle

[kiss161]

My end of my domino throttle broke off
I priced them on eBay pretty pricey
Any one on here use another brand ??
That I can replace without removing throttle
Cable ? Domino has adjustment piece
With slot in it so no need to remove cable
From carb

 

[gasgasman]

MotionPro has just the throttle tubes.
http://www.motionpro.com/product/01-1185

There's no need to mess with the cable at the carb side when replacing the throttle tube.
Just remove the screw on the top of the throttle housing and remove the cable from the tube.

 

[shang]

ODI lock-on grips come with the whole throttle tube. I believe the AME's do as well. I've been using the lock-ons for years and love them.

 

[kiss161]

It broke right where the cable goes in I need
The whole assembly

 

[barossi73]

G2 make a nice alloy quickpull throttle if you want something more robust that shortens wrist action.its also adjustable by different throttle cams.
That said,i dont have one,but its on my wish list!

 

[kiss161]

MotionPro has just the throttle tubes.
http://www.motionpro.com/product/01-1185

There's no need to mess with the cable at the carb side when replacing the throttle tube.
Just remove the screw on the top of the throttle housing and remove the cable from the tube.[/QUOTE
It broke right where the cable goes in I need
The whole assembly

 

[Moto7man]

Have you looked at the Magura 314 Duo? It has a cam for mx and enduro.

 

[kiss161]

Have you looked at the Magura 314 Duo? It has a cam for mx and enduro.

thx just bought one for $21 beats paying $60for domino

http://www.ebay.com/itm/261468488978?ul_noapp=true

 

[Moto7man]

thx just bought one for $21 beats paying $60for domino

http://www.ebay.com/itm/261468488978?ul_noapp=true

You are welcome. I bought one of these for 94 CR 250 restoration.

 

[kiss161]

You are welcome. I bought one of these for 94 CR 250 restoration.

Only problem is that there is no adjustment
Piece on the end of it

 

[gasgasman]

Switch over to the Motion Pro cable. It has the adjuster built it. Also has captured ends, so the cable sheath won't pull out. Causing a wide open situation if you hit a branch.

 

[barossi73]

Gasgasman you have just identified a problem with a recluse,in a wideopen throttle jam you cant grab the clutch!
Perhaps locked cable end should be a must for recluse guys?its hard to hit that tiny kill button in the heat of the moment but the clutch lever is instinctive