gg fat bar clamps

[jhendr3702]

want to change my 01 to fat bar set up.. anyone got a set of clamps ?

 

[Ryan_250]

Fatbar Clamps and Bars

I have bars and clamps, although I am in the UK I will happily post to you...

 

[husley]

Hi

I have OEM bars and perch from 2010. 10 hrs use on them

 

[lankydoug]

I have OEM bars and perch from 2010. 10 hrs use on them

Will these fit an 03 EC200?

 

[jhendr3702]

all i need are the clamps.. if anyone wants to separate..

 

[gasser]

I also have a set of risers and fatbars but these bars (new pull off from a ktm) have more pull back than the stock gasser bars. Price $50 shipped (U.S. only)

 

[jhendr3702]

I also have a set of risers and fatbars but these bars (new pull off from a ktm) have more pull back than the stock gasser bars. Price $50 shipped (U.S. only)

done deal.. i love this site..

 

[gasser]

I also have a set of risers and fatbars but these bars (new pull off from a ktm) have more pull back than the stock gasser bars. Price $50 shipped (U.S. only)

sale pending

 

[Rick]

lanky.......I got a set from an older model Berg with WP forks.....they have 4 pinch bolts...bolted right up with no issues!

 

[lankydoug]

lanky.......I got a set from an older model Berg with WP forks.....they have 4 pinch bolts...bolted right up with no issues!

I'm really just interested in some spacers that go between the top triple and the bar clamps. My 03 has a 10mm bolt that goes down through the bottom clamp and the top triple with a nut on the bottom. I need two .400" spacers to raise my bars and replace the stack of washers that I'm using with a special shoulder bolt.

 

[gasser]

I'm really just interested in some spacers that go between the top triple and the bar clamps. My 03 has a 10mm bolt that goes down through the bottom clamp and the top triple with a nut on the bottom. I need two .400" spacers to raise my bars and replace the stack of washers that I'm using with a special shoulder bolt.

Ditch the washers and use an extra set of handlebar clamp tops as spacers in between the bottom half of the handlebar clamp and the top (see photo). Will raise the bars 3/4 of an inch or more. Anyone running the Bonz bark buster mounts should have an extra pair of these clamp tops (which the Bonz replace) lying around. I'm sure I have a set in my spares.

 

[lankydoug]

Ditch the washers and use an extra set of handlebar clamp tops as spacers in between the bottom half of the handlebar clamp and the top (see photo). Will raise the bars 3/4 of an inch or more. Anyone running the Bonz bark buster mounts should have an extra pair of these clamp tops (which the Bonz replace) lying around. I'm sure I have a set in my spares.

I like the way you think. PM sent

 

[jhendr3702]

sale pending

came in today.. thanks