B Brian VT New member Sep 5, 2008 #1 Either the search here sucks or I do. What was the trick to keeping the orings in the grooves until you get the head on ? Got it. I stretched them a bit. Last edited: Sep 5, 2008
Either the search here sucks or I do. What was the trick to keeping the orings in the grooves until you get the head on ? Got it. I stretched them a bit.
W WoodsRider New member Sep 5, 2008 #2 Another trick I use is to coat the o-rings with some vaseline.
eff Silver Level Site Supporter Sep 5, 2008 #3 I did just as you did. I gently stretched them a few times and they stayed in their seats with no problems.
I did just as you did. I gently stretched them a few times and they stayed in their seats with no problems.
JoshP New member Sep 5, 2008 #4 And if you stretch them a little too much, just throw into the freezer for a bit and they will shrink back
And if you stretch them a little too much, just throw into the freezer for a bit and they will shrink back
JoshP New member Sep 5, 2008 #6 Well it's what happens when the water is just a little too cold for the frank and beans
